Page 172 - Course_Catalog_2020-2021
P. 172

Design & Manufacturing Technologies
DMT 60E SolidWorks (Introduction) 4 Units
D
 DMT 52 Geometric Dimensioning and Tolerancing: CAD Applications
2 Units
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the fundamentals of computer-aided design and drafting using SolidWorks software, and applications of SolidWorks in creating manufacturing models (parts, assemblies, and drawings).
DMT 61A SolidWorks (Intermediate) 4 Units
Prerequisite: Any DMT 60A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the intermediate-level application of SolidWorks in creating and maintaining solid models and drawings. Special emphasis is given to the creation and development of new drawings based on preexisting solid models.
DMT 61B SolidWorks (Intermediate) 4 Units
Prerequisite: Any DMT 60A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the intermediate-level application of SolidWorks in creating and maintaining solid models and drawings. Special emphasis is given to the creation and development of new drawings based on preexisting solid models.
DMT 61C SolidWorks (Intermediate) 4 Units
Prerequisite: Any DMT 60A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the intermediate-level application of SolidWorks in creating and maintaining solid models and drawings. Special emphasis is given to the creation and development of new drawings based on preexisting solid models.
DMT 61D SolidWorks (Intermediate) 4 Units
Prerequisite: Any DMT 60A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the intermediate-level application of SolidWorks in creating and maintaining solid models and drawings. Special emphasis is given to the creation and development of new drawings based on preexisting solid models.
DMT 61E SolidWorks (Intermediate) 4 Units
Prerequisite: Any DMT 60A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the intermediate-level application of SolidWorks in creating and maintaining solid models and drawings. Special emphasis is given to the creation and development of new drawings based on preexisting solid models.
DMT 62A SolidWorks: Top-Down Design and 4 Units Advanced System Tools
Prerequisite: Any DMT 61A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Advanced 3D Solid Modeling techniques using SolidWorks. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using so-called Top- Down Assembly techniques.
DMT 62B SolidWorks: Top-Down Design and 4 Units Advanced System Tools
Prerequisite: Any DMT 61A-E course.
Two hours lecture, six hours laboratory (96 hors total per quarter).
Advanced 3D Solid Modeling techniques using SolidWorks. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using so-called Top- Down Assembly techniques.
DMT 62C SolidWorks: Top-Down Design and 4 Units Advanced System Tools
Prerequisite: Any DMT 61A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Advanced 3D Solid Modeling techniques using SolidWorks. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using so-called Top- Down Assembly techniques.
DMT 62D SolidWorks: Top-Down Design and 4 Units Advanced System Tools
Prerequisite: Any DMT 61A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Advanced 3D Solid Modeling techniques using SolidWorks. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using so-called Top- Down Assembly techniques.
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
One hour lecture, three hours laboratory (48 hours total per quarter).
This course will focus on geometric dimensioning and tolerancing, utilizing ASME Y14.5M-2009 standards as they apply to engineering and manufacturing drawings. CAD drawings will be completed from solid models using multiple datums, symbols, feature control frames, and other GD&T specifications.
DMT 53 3D Printing, Reverse Engineering 4 Units and Rapid Prototyping: Strategies in Industry
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
Four hours lecture (48 hours total per quarter).
The objective of this course is to present a comprehensive overview of 3D Printing, spanning from fundamentals to applications and technology trends. Participants will learn the fundamentals of (AM) Additive Manufacturing/3D Printing of polymers, metals, composites, and biomaterials, and will realize how process capabilities (rate, cost, quality) are determined by the material characteristics, process parameters, and machine designs. Application areas including aerospace components, electronics, high-tech, medical devices, and consumer products will be discussed by means of detailed examples and case studies. Particular emphasis will be placed on concepts of industry applications, and related design principles and process standards. In class sessions will run live demonstrations with state- of-the-art industry grade 3D Printers, 3D Laser scanners and reverse engineering tools. Participants will understand how to design, fabricate, and measure test parts, and explore Additive Manufacturing process limits as well as appropriate applications of these technologies.
DMT 54 3D Printing/Additive Manufacturing: Theory and Practice
4 Units
Prerequisite: DMT 53.
Four hours lecture (48 hours total per quarter).
A focus on design considerations and rapid prototyping applications of Additive Manufacturing (AM), commonly known as 3D Printing. Using a combination of lecture and hands-on projects, students will explore the design and material considerations within AM and will configure AM systems and build prototypes and functional parts. Guest lecturers from the AM industry will provide key insights and best practices across a wide array of AM technologies. Students are expected to have a fundamental understanding of at least one parametric modeling CAD system to produce functional designs.
DMT 55 Survey of Design and Manufacturing Processes/Modern Fabrication
4 Units
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
Four hours lecture (48 hours total per quarter).
This survey course is designed to introduce students to both design, manufacturing and modern fabrication, by means of demonstrations, with the following areas of emphasis: manufacturing processes, equipment and systems, design for manufacturing, measurement tools, blueprint reading, rapid prototyping (3D printers), CNC machine set-up, CNC machine programming (lathe and mill), CAD/ CAM and quality control using geometric dimensioning and tolerancing (GD&T). This hands on, team based course is designed to provide students with instruction and skills through applied real world experience to enable insight as to how products are designed and fabricated. Students will be able to identify the terminology of each area, examine each technique and skill requirement, and gain a fundamental understanding of diverse industry processes.
DMT 60A SolidWorks (Introduction) 4 Units
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the fundamentals of computer-aided design and drafting using SolidWorks software, and applications of SolidWorks in creating manufacturing models (parts, assemblies, and drawings).
DMT 60B SolidWorks (Introduction)
4 Units
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the fundamentals of computer-aided design and drafting using SolidWorks software, and applications of SolidWorks in creating manufacturing models (parts, assemblies, and drawings).
DMT 60C SolidWorks (Introduction)
4 Units
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the fundamentals of computer-aided design and drafting using SolidWorks software, and applications of SolidWorks in creating manufacturing models (parts, assemblies, and drawings).
DMT 60D SolidWorks (Introduction) 4 Units
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the fundamentals of computer-aided design and drafting using SolidWorks software, and applications of SolidWorks in creating manufacturing models (parts, assemblies, and drawings).
2O20-2O21 DE ANZA COLLEGE CATALOG
171
All courses are for unit credit and apply to a De Anza associate degree unless otherwise noted.

















   170   171   172   173   174